Static Solutions CT-8900 Combo Tester Instructions 1/15/2015
23
Trouble Shooting if Scanner Does Not Read Correctly
1. If your card- reader configuration is incorrect the card will not work. The reader must be programmed for your card
configuration. I.e. tracks 1,2,3 or 1 and 2, or 2 and 3 etc.
2. Try reversing your card around and offering the readable side on the reverse side. Pass card faster or slower. Clean with
water or alcohol if dirty.
3. Make sure the reader has been pre programmed to send a carriage return after a scan
4. Check characters to use configuration. If problems still continue send a sample card to Static Solutions.
To Next Page
Loading...
Need help?
General
