Steinbach MINI - Display; Standby Mode; Operating Mode

Display
Standby mode
In standby mode, the heat pump is ready for operation but it is deactivated. By pressing the On/Off
15
button, the heat pump switches to operating mode.
After switching on, the heat exchanger has to heat up first before the heat pump is ready
for use in operating mode. This process can take up to 90 seconds.
Display:
-
The display
14
shows "OFF".
Operating mode
In operating mode, the heat pump heats the water to the set water temperature. The standard value for
the set water temperature is 27 °C. You can set the water temperature to a value between +15 °C and
+35 °C. By pressing the On/Off
15
button, the heat pump switches to standby mode. The desired water
temperature can be set by pressing the Up button
16
or the Down button
17
.
After switching off, the heat exchanger has to cool down before the fan stops running.
This process can take up to 90 seconds.
Set
G
14
15
35
en