Problem Possible cause Remedy
Display: error message P6 Insufficient water flow. Increase the water throughput of the
hydraulic circuit that supplies the heat
pump.
Contact an authorized qualified person.
If the problem cannot be solved, contact the customer service listed on the last page.
Technical data
Model: BP-39WS-B Mini/049275 Coefficient of performance
(COP):
6.0
Item number: 049275 Energy efficiency ratio
(EER):
- - -
Total weight: approx. 18 kg Protection class: I
Dimensions
(W x H x D):
365 mm ×
370 mm x
320 mm
Protection code: IPX4
Pool volume
(water content):
max. 20,000 l (5283.44
gal)
Sound pressure level ****: 47 dB(A)
Heating output *: 3.9 kW Water throughput: min. 3,000 l/h
Heating input
power *:
0.65 kW Nominal suction pressure: 0.7 MPa
Heating
input current *:
3.3 A Maximum suction
pressure:
1.5 MPa
Cooling output *: - - - Nominal pump pressure: 3.0 MPa
Cooling
input power *:
- - - Maximum pump pressure: 4.3 MPa
Cooling
input current *:
- - - Refrigerant: R32
Maximum input power: 0.85 kW Maximum refrigerant
capacity:
280 g
Maximum input current: 3,9 A Global warming potential
(GWP):
675
Operating voltage and
frequency **:
220 – 240 V~, 50 Hz CO2 equivalent: 0.19 kg/t
Pool water temperature increase*** (outside temp. = water temp. = 26 °C)
Salt content in water (salt electrolysis): <0.5%
10,000 l 20,000 l
0.3 °C/h 0.2 °C/h
* Variable - dependent on ambient conditions
** Single-phase alternating current
*** Heat loss has not been taken into account (e.g., with or without cover, insulation etc.)
**** Emission sound level comparable to a large household appliance
43
To Next Page
Loading...
