EasyManua.ls Logo

stellar labs 9628 - Page 17

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 3 - Maintenance
3-6
Owner/Company:
Contact Person:
Crane Make/Model:
Crane Serial:
Type of Inspection (check one)
Stellar Industries Inspection Checklist for Telescopic Boom Cranes
Use of this checklist is subject to terms of the Stellar
Warranty information. Additional copies of this checklist
can be obtained by contacting Stellar Customer Service
at (800) 321-3741 or by download at:
http://www.stellarindustries.com/pages/downloads.htm
Date Inspected:
Hour Meter Reading:
Inspected by: (
print)
Signature of Inspector:
Daily (if deficiency found)
Monthly
Quarterly
Annual
Type of Inspection Information
Daily and monthly inspections are to be performed by a “designated” person, who has been
selected by the employer or the employer’s representative as being competent to perform specific
duties.
Quarterly and annual inspections are to be performed by a “qualified” person who, by possession
of a recognized degree in an applicable field or certificate of professional standing, or who, by
extensive knowledge, training and experience has successfully demonstrated the ability to solve or
resolve problems related to the subject matter and work.
One hour of normal crane operation assumes 20 complete cycles per hour. If operation exceeds
20 cycles per hour, inspection frequency should be increased accordingly.
Consult the Stellar Owner’s Manual for additional inspection items.
Before inspecting and operating the crane, make certain that t he crane is set up away from power
lines and leveled with outriggers fully extended.
Daily (D): Before each day of operation, those items with a (D) must be inspected. This
inspection need not be recorded unless a deficiency is found.
Monthly (M): Monthly inspections or 100 hours of normal operation (which ever comes first)
includes all daily and monthly inspection items plus items designated with a (Q).
This inspection
must be recorded.
Quarterly (Q): Every three months or 300 hours of normal operation (which ever comes first)
includes all daily and monthly inspection items plus items designated with an (M). This inspection
must be recorded.
Annual (A): Each year or 1200 hours of normal operation (which ever comes first) includes all
items on this form which encompasses daily
, monthly, and quarterly inspections plus those items
designated by (A). this inspection must be recorded.

Related product manuals