stellar labs TC13 - Step 6: Stow the Crane; Step 7: Stow the Stabilizers; Step 8: Disengage the PTO and Deactivate Power; Step 9: Release the Parking Brake

Stellar
®
TC Series Telescopic Crane Owner’s Manual | Page 5
Step 6: Stow the crane.
Once you have performed your lift and are ready to shut down the work site:
• Retract all extensions.
• Rotate the crane until it aligns with the stowed position.
• Lower the boom gently into the stored position.
• Store the radio remote control, preferably in the cab of the truck.
The parking brake must be released before moving the truck.
Make certain that any air tanks are completely drained before moving
the truck.
Step 7: Stow the stabilizers.
After stowing the crane, return to the stabilizer crank and fully retract the stabilizer(s).
WARNING
Step 9: Release the parking brake.
Step 8: Disengage the PTO and deactivate power.
• Depress the clutch on manual transmission vehicles.
• Disengage the PTO. Consult the PTO manual for specic instructions if needed.
• Slowly release the clutch on a manual transmission vehicle. Note: Make sure the PTO
indicator light turns off.
• Turn off all switches on the control panel.