What does it mean if my Stelpro STCNP display indicates E1, E2, or E3?
If the display of your Stelpro Thermostat shows E1, E2, or E3, this indicates a faulty thermal sensor. Contact customer service for assistance.
What to do if the red indicator lights up frequently on Stelpro Thermostat?
Contact customer service if the red indicator lights up frequently on your Stelpro Thermostat.
What to do if Stelpro STCNP Thermostat display does not come on?
If the Stelpro Thermostat display doesn't turn on, verify that the thermostat is correctly wired. Also, check the power supply at the electrical panel.
What to do if Stelpro STCNP Thermostat is on but heating doesn't run?
If the Stelpro Thermostat indicates it's on, but the heating isn't running, check if the thermostat is properly connected and make sure the red indicator is not lit. Refer to the installation section.
What does E1 E2 or E3 mean on Stelpro STCNP Thermostat?
If your Stelpro Thermostat displays E1, E2, or E3, it indicates a faulty thermal sensor. Contact customer service for assistance.
What to do if red indicator lights up frequently on Stelpro Thermostat?
Contact customer service.
Guidance on choosing the optimal location for thermostat and sensor.
Detailed steps for physically mounting and wiring the thermostat.
Instructions on how to adjust desired temperature levels.
Steps to test the integral ground fault protection feature monthly.
Steps to engage the security lock feature to set max temperature.
General| Wi-Fi Connectivity | No |
|---|---|
| Control Type | Electronic |
| Warranty | 3 years |
| Temperature Range | 5°C to 30°C (41°F to 86°F) |
| Display | Digital |
| Mounting | Wall |
To Next Page
