EasyManua.ls Logo

Stels 650 GUEPARD - Page 39

Default Icon
126 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PRESTART CHECKS 650/800/850 GUEPARD
37
ELEMENTS OPERATIONS PAGE
Foot brake
● Check the operability If the drive is too light or “cotton”, contact a repair workshop
for the hydraulic system bleeding.
● Check the pedal free stroke, adjust it, if necessary.
● Check the brake pads for wear, replace them, if necessary.
● Check the brake fluid level in the tank and, if necessary, fill up the recommended
brake fluid to the indicated level.
● Check the hydraulic system for leakage. If necessary, correct the fault.
● Make sure that operation is smooth. If necessary, lubricate the wire cable and control
elements.
● Make sure that the wire cable is moving easily, if necessary, correct the fault.
● Make sure that operation is smooth. If necessary, lubricate it.
● Check the wheels condition. If necessary, replace them.
● Check the tyres condition and the tread depth. If necessary, replace them.
● Check the tyre inflation pressure. If necessary, correct it.
● Make sure that operation is smooth. If necessary, lubricate the pedal axis of revolution.
● Make sure that operation is smooth. If necessary, lubricate the handle axis of revolution.
● Check them for damage and fractures, if necessary, replace them.
● Make sure that all the nuts, bolts and screws are tightened as required.
● Check the correct operation of the head lamps, position lamps, rear lamps, turn lights,
brake lights and indicators. If necessary, correct the fault.
● Make sure that the accumulator battery is charged and connected correctly
Throttle lever
Control wire
cables
Wheels and
tyres
Brake pedal
Brake levers
Dust covers
Chassis fixture
components
Lighting devices,
switches
Accumulator unit
NOTE:_____________________________________________________________________________________________________
The maintenance of some elements presented in the table should be carried out in repair workshops. The operations which should be
carried out in special repair workshops are described on page 70.
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
39, 85
26, 40, 88
88
40, 89
29, 39 - 85
29, 854
23, 90, 91
91
41
94
manufacture website : stelsoffroad.com

Related product manuals