Stels 650 GUEPARD - Page 75

MAINTENANCE 650/800/850 GUEPARD
73
PERFORMED OPERATIONS
OPERATIONAL KM
OPERATING HOURS, HOUR
SERVICE LIFE, MONTHS
М1 М2 М3 М4
М5 М6 М7
300 1200 2400 3600 4800 6000 7200
20 75 150 225 300 375 450
2612 18 24 30 36
3. UNDERCARRIAGE
3.1. Check the shock insulators condition and operation.
Replace worn components.
*******
3.2. Check the wheel rim condition for damage, chips,
dents. Replace worn components.
*******
3.3. Check and adjust (if necessary) the front wheel toe-in
(0 - +/- 2 mm)
*******
3.4. Check the tires for damage and cuts. Check the residual
tread depth (grouser height) (at least 0.8 mm). If necessary,
replace them.
*******
3.5. Check condition of the front and rear suspension levers (pins).
Replace worn components. Lubricate the lever bushing.
(Multi-purpose lithium-based grease)
*******
3.6. Check the condition of the suspension and undercarriage
components (stabilizer bar, stabilizer links, wheel
hub bearings, etc). Lubricate (replace), if necessary.
(Use multi-purpose lithium-based grease for lubrication)
** ****
4. CONTROL ELEMENTS
4.1. Check, adjust, lubricate the throttle control drive,
replace worn components, if necessary (Use engine oil for
lubrication)
*******
manufacture website : stelsoffroad.com