Flight Manual STEMME S6
Doc.-No: P400-006.000 E Page: 6-8 Revision: ---
Date of Issue: 07. October 2008 Date of Rev.: --.--.----
8. Divide the results from row 7 to determine the lever of the CG in the T/O-
configuration. These values must be within the allowed limits. If this is not
the case, payload and fuel must be adjusted.
All mentioned and used levers give the distance from the corresponding CG to
the reference plane (RP)!
Warning: The CG must always stay within the allowed limits. If this is
not the case, unstable aircraft behavior might result!
To Next Page
Loading...
Need help?
General
