Flight Manual STEMME S6
Doc.-No.:P400-006.000 E Page: 8-10 Revision: ---
Date of Issue: 07. October 2008 Date of Rev.: --.--.----
8.5.3 Propeller
Damage to the propeller and operational malfunctions need to be inspected by a
knowledgeable person.
• The surface (PU-finish and acrylic-finish) can be cleaned using commercial
cleaning-agents and preserving-agents intended for cars.
• Prevent moisture from reaching the wooden core. When in doubt, let the
propeller be inspected by an examiner.
• For additional information, see „operating-instructions and installation-
instructions“ ATA 61-01-18 (E-118) by mt-Propeller (the manufacturer).
8.5.4 Engine
The cleaning of the engine is performed during regular maintenance, according
to the directions of the manufacturer’s (ROTAX) maintenance-manual.
(„Maintenance-Manual (Line-Maintenance) for ROTAX engine model 914
Series“)
8.5.5 Interior, Seats and Fairings
Dirt in the interior, when possible, should be removed using a vacuum-cleaner.
Loose or lost items should be removed or stored in an appropriate manner.
• Clean composite-surfaces with a lint-free and slightly moistened rag.
• The instruments should be cleaned with with a dry, soft and scratch-free rag.
To Next Page
Loading...
General
