Instruction Manual
for
AS380 Series Elevator Integrated Drive Controller
228
Chapter 10: Maintenance
This chapter describes general information for maintenance of this product.
◎ Start operation 10minutes after it is
disconnected to main in order to ensure at
that time charge indicator lamp goes out or
DC bus voltage is under 24V
Or it may cause risk of electric shock.
◎ In no case may the elevator integrated
drive controller be remodeled without
authorization
Or it may cause risk of electric shock and injury.
◎ Only professional electricians may be
allowed for maintenance. Never leave foreign
wire ends or metal substances inside.
Or it may cause fire risk.
◎ When power is on, don’t change the
wiring or remove terminals.
Or it may cause risk of electric shock
10.1 Warranty
Our company guarantees the elevator integrated drive controller (main body) in the following
cases:
In the warranty period calculated form the delivery date, the manufacture will be liable for failures
or damages occurred in normal operating conditions; when warranty period is expired, the service
will be reasonably paid.
The services for dealing with the flowing troubles will also be paid even if it is still in warranty
period:
1） Failures and/or troubles caused due to use it not in accordance with instruction manuals or
modify or remodel it without authorization.
2） Not used for its intended use.
3） Damages during transport or due to falling after purchase.
4） Damages due to earthquake, fire, flood, lightning, abnormal voltage or other force majeure.
10.2 Product Checkup
In case damages, troubles or other problems are found on product, please contact the agencies or
out technical departments and provides the following information:
To Next Page
Loading...
Need help?
General
