STEP AS380-4T0011 User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
90
Key Function
Shortcut
key
1. Return to elevator status interface when it is not in status interface
2. Enter fault inquiry interface from elevator status interface
1. Return to elevator status interface from fault inquiry interface
2. Enter when elevator status interface display
3. Enter the car call interface when I/O status check interface display
Enter speed curve window
Direction
key
1.Move up by one item in function selection
2.Increase 1 of the present data in data input
3.Move up by 16 items
4.Set ON or OFF status when bit setting.
1.Move down by one item in function selection
2.Decrease 1 of the present data in data input
3.Move down by 16 items for selecting bit parameter
4.Set ON or OFF status when bit setting
1.Move up by 10 items in function selection
2.Move cursor left for data input
3.Move left by 1 item for bit setting
1.Move down by 10 items for function selection
2.Move right for data input
3.Move right by one item for bit setting
Function
key
1.Return to previous menu
2.Cancel data input
1.Enter function selection
2. Enter edit status when viewing data
2.Save data input
5.2.4 Introduction to display interface of LCD hand-held operator
5.2.4.1 display interface classification
The below table show several mina display interface of handheld operator.
Table 5.6 the type and main content of display interface
Interface name Main content
Mode selection
interface
Mode selection
Press esc to enter
manual l
y
Press enter to auto in
The first status when power on and all well connected. Operator mode
select, for the integrated device ,please press enter button to enter
automatically
Version interface
version
NSPE02
30.03
Press enter button to enter the interface when power on and all well
connected. The program version is shown. The third line is the elevator
drive program version.

STEP AS380-4T0011 Specifications

General

Brand	STEP
Model	AS380-4T0011
Category	Controller
Language	English