Need help?Do you have a question about the STEP AS380-4T0011 and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Model | AS380-4T0011 |
| Protection Level | IP20 |
| Operating Temperature | -10°C to +50°C |
| Humidity | non-condensing |
| Storage Temperature | -20°C to 70°C |
Provides crucial safety precautions for installation and handling.
Lists important points to observe when using the drive controller.
Details the technical specifications of the AS380 series integrated drive controller.
Offers essential guidelines and precautions for installing the drive controller.
Highlights important considerations for connecting peripheral equipment.
Details the essential checks required before powering on the elevator system.
Outlines the steps for powering on the system and performing initial checks.
Guides on configuring system parameters and performing motor self-study.
Describes the procedure for testing the elevator's slow car operation.
Explains the process and method for performing hoist way self-study.
Details the procedure for test running the elevator in express car mode.
Provides methods for adjusting elevator comfort by tuning mechanical and electrical factors.
Guides on regulating elevator leveling accuracy and adjusting related parameters.
Explains how to adjust pre-load weighing compensation for smoother elevator starts.
Analyzes fault codes, situations, causes, and solutions for the integrated device control system.
Provides fault code analysis for the integrated drive system.
Details the necessary grounding methods and precautions for electrical installation.
Explains leakage current and measures to counteract its effects.
Offers essential precautions for electrical installation according to EMC directives.
Lists fault codes, descriptions, possible causes, and solutions for system faults.
To Next Page