CL86T(V4.0) Closed Loop Stepper Drive User Manual
2.3 Mechanical Specifications
(unit: mm [1inch=25.4mm])
Figure 1: Mechanical specifications
2.4 Heat Dissipation
CL86T(V4.0) reliable working temperature should be no more than 40℃ (109°F)
It is recommended to mount the drive vertically to maximize heat dissipation. Mount a cooling fan nearby
if necessary.
If multiple CL86T (V4.0) drives are installed, it is suggested to keep a minimal 30mm (12 inches)
between two of them.
To Next Page
Loading...
