Need help?Do you have a question about the Steren COM-820 and is the answer not in the manual?
General| Model | COM-820 |
|---|---|
| Category | Network Router |
| Ports | 4 |
| LED Indicators | Power |
| Power Supply | 5V DC |
Lists key features of the wireless router, including compliance with standards and transmission technologies.
Describes the LED indicators on the front panel of the router.
Details the rear panel components like antenna and reset button.
Lists the necessary hardware and software for connecting the router.
Specifies the ideal conditions for installing the router.
Explains how to configure TCP/IP settings for PCs connected to the router.
Details PPPoE connection setup for internet access.
Guides on configuring the wireless network parameters.
Displays the router's current status and configuration information.
Configuration options for the Local Area Network.
Configuration for the Wide Area Network connection.
Basic settings for the wireless network, including SSID and security.
Configuration options for the DHCP server.
Setting up public services by redirecting internet requests to specific computers.
Enables or disables the firewall and sets default filtering rules.
Allows upgrading the router's firmware to the latest version.
Restores the router to its factory default settings.
Guides on configuring the router for ADSL internet access.
Guides on configuring the router for Ethernet internet access.
Steps to configure Virtual Server or DMZ Host for Netmeeting.
Steps to configure a WEB Server on the LAN, avoiding port conflicts.
Troubleshooting steps for wireless connection issues.
Steps to install the TCP/IP component in Windows 95/98.
Detailed steps to configure TCP/IP settings for PCs.
To Next Page
