3) Login to the router, click the “Forwarding” menu on
the left of your browser, and click the “Virtual Servers”
submenu. On the “Virtual Server” page, enter “80” into
the blank below the “Service Port”, and your IP address
below the IP Address, assuming 192.168.1.188
for an example, remember to “Enable” and “Save”.
5. The wireless stations cannot connect to the router.
1) Make sure the “Wireless Router Radio” is enabled.
2) Make sure that the wireless stations’ SSID accord with
the router’s SSID.
3) Make sure the wireless stations have right KEY for
encryption when the router is encrypted.
4) If the wireless connection is ready, but you can’t
access the router, check the IP Address of your wireless
stations.
ENGLISH
ENGLISH-78
To Next Page
Loading...