Steren COM-820 User Manual

- Enable Domain Filtering - set Domain Filtering is enabled or
disabled.
- Enable MAC Filtering - set MAC Address Filtering is enabled or
disabled. You can select the default fi ltering rules of MAC
Address Filtering, either Allow or Deny accessing the router.
IP ADDRESS FILTERING
The IP address Filtering feature allows you to control Internet
Access by specifi c users on your LAN based on their IP
addresses. The IP address fi ltering are set on this page, fi gure
42:
To disable the IP Address Filtering feature, keep the default
setting, Disabled. To set up an IP Address Filtering entry, click
Enable Firewall and Enable IP Address Filtering on the Firewall
page, and click the Add New… button. The page “Add or Modify
an IP Address Filtering entry” will appear shown in fi gure 43:
Fig. 42
ENGLISH
ENGLISH-51

Steren COM-820 Specifications

General

Brand	Steren
Model	COM-820
Category	Network Router
Language	English