3. I want to use Netmeeting, what do I need to do?
1) If you start Netmeeting as a sponsor, you don’t need
to do anything with the router.
2) If you start as a responsor, you need confi gure Virtual
Server or DMZ Host.
3) How to confi gure Virtual Server: Login to the router,
click the “Forwarding” menu on the left of your browser,
and click “Virtual Servers” submenu. On the “Virtual
Server” page, enter “1720” into the blank below the
“Service Port”, and your IP address below the IP
Address, assuming 192.168.1.169 for an example,
remember to “Enable” and “Save”.
Your opposite side should call your WAN IP, which is
displayed on the “Status” page.
4) How to enable DMZ Host: Login to the router, click the
“Forwarding” menu on the left of your browser, and click
“DMZ” submenu. On the “DMZ” page, click “Enable”
radio and type your IP address into the “DMZ Host IP
Address” fi eld, using 192.168.1.169 as an example,
remember to click the “Save” button.
Your opposite side should call
To Next Page
Loading...