3 — Component Identification
18
10057344_H
AMSCO® 5000 Series
Operator Manual
.
Door Interlock
A door interlock feature allows only one door to be opened at a time to avoid cross-contamination.
Load Access Code
A safety feature prevents opening of doors if a cycle has not been successfully completed.
When a cycle has been interrupted (operator has pressed Emergency Stop button or aborted prior to thermal
disinfection completion), a load access code (1379) must be entered by an authorized person to unlock and open load
side door only. This prevents cross-contamination. Refer to Cycle and Control Value Programming section for more details
on load access code. This code should be know by every operator.
3.5 SCS Conveyor System
The SCS Conveyor System is designed to be used in processing departments of healthcare facilities, to provide loading
and unloading of 24 x 24” (610 x 610 mm) accessory racks or baskets to interface with the AMSCO 5052 Single-
Chamber Washer/Disinfector.
Refer to SCS Conveyor System Operator Manual for more detailed information about the SCS Conveyor System.
.
To Next Page
Loading...
Need help?
General
