Seat Removal (Fig 5.5 - 5.8)
1. Push the seat rotate lever forwards and turn seat to
face the front.
2. Stand behind the seat, flip up the arm rests and fold
the backrest forward by lifting up the backrest
adjustment lever.
4. Place hands on either side of seat base, push the seat
rotate lever forwards and lift the seat vertically keeping
back posture upright. Bend the knees if required.
Fig.5.5
Fig.5.6
Fig.5.7
5.2. ANTI-TIP WHEELS:
These are factory fitted and should not be removed. The
anti-tip assembly is bolted to the rear frame of the
scooter, (Fig 5.8).
WARNING!
Never use the scooter without the anti-tip wheels fitted.
Fig.5.8
To Next Page
Loading...
