EasyManua.ls Logo

Sterling Elite2 Plus - Service, Maintenance, and Re-use; Service and Maintenance Schedule

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
47
Sterling Elite
2
XS-RS-Plus
After performing any maintenance or repairs on the
scooter you must make sure that it is functioning correctly
before it is used.
Visually inspect the scooter to make sure its parts are •
correctly positioned and attached to the scooter and
all fasteners are sufficiently tightened.
Make sure that the seat is correctly fitted and •
adjusted.
Switch on the scooter – Does the battery gauge flash •
with the ! symbol or error show on the LCD? This
signifies that there is a fault in the electronic system.
Refer to section 8.0 for basic troubleshooting.•
Perform the parking brake check.•
Operate all of the electric options, including lights and •
indicators to make sure that they work correctly.
Drive the scooter to make sure the scooter performs •
as it did before.
WARNING!
If you are in any doubt about the performance •
requirements of your scooter contact your Sunrise
Medical authorised dealer.
Only carry out the maintenance tasks listed below •
together with any general cleaning.
Do not attempt any task you are not sure of.•
18.1 RE-USE
Due to its construction, high level of flexibility and the
modular construction system make the Elite2 ideal for
re-use. Individual accessories and options can be fitted
and removed very quickly and are a range of possibilities
so that individual adjustments can be made to suit the
end user.
Maintenance and Inspection Schedule
Daily
Weekly
Quarterly
Six month
Annually
Check battery level indicator and charge if necessary.
¯
Check the control levers on the tiller are not bent or damaged.
¯
Ensure all removable parts are securely fastened.
¯
Check lap strap for wear and make sure the buckle is operational.
¯
Check the Parking brake clicks on and off.
¯
Check tyres and inflate if required.
¯
Ensure any visible nuts and bolts are tight.
¯
Ensure all cables and connectors are sound and are tidy and out of the way.
¯
Clean the scooter and upholstery regularly.
¯
Battery terminal inspection – Remove any corrosion and apply Vaseline.
¯
Check upholstery, seating, headrests, arm pads for wear.
¯
Complete inspection, safety check and service should be made by a Sunrise
Medical authorised dealer.
¯
18.0 Service and Maintenance

Related product manuals