STIEBEL ELTRON wpf 20

12 | WPF 20/27/40/52/66 WWW.STIEBEL-ELTRON.COM
10.5 Fitting the casing parts
Fitting the plinth facia and control panel frame
1
2
1
C26�03�01�0791
2
1.
3.2.
f Hook the plinth facia 1 into the device frame and secure each with three screws
f Position the covers 2 and secure each with two screws to the sides.
Fitting the side covers
C26�03�01�0792
2
1
f Fix the guard plate 1 with four screws. The both in the front with the toothed locked washer.
f Secure the control panel frame 2 with five screws.
INSTALLATION
INSTALLATION