STIEBEL ELTRON WPM - Programs; Heating Program; Dhw Program; Party Program

COMMISSIONING
Menu
14 | WPM www.stiebel-eltron.com
Menu: PROGRAMS
PROGRAMS
Here you can set all the times for the different programs and start
the heat-up program.
Setting pairs of switching times
In most programs, you can set three pairs of switching times per
day or block of days. The switching time pairs are shown on the
display, to the right of the clock. Each switching time pair consists
of a start time and an end time. After a switching time pair has
expired, the heat pump switches to the operating mode applicable
at the time.
Periods around midnight
Switching time pairs can be programmed only up to 24:00. If you
want to choose periods that extend beyond midnight, you will
need to set an additional switching time pair for the following day.
Deleting switching time pairs
By resetting the start time to "--:--", the associated end time is
automatically reset.
 HEATING PROGRAM
 HEATING CIRCUIT 1
 HEATING CIRCUIT 2
 HEATING CIRCUIT 3
 HEATING CIRCUIT 4
 HEATING CIRCUIT 5
 DHW PROGRAM
 PARTY PROGRAM
 HOURS
 HOLIDAY PROGRAM
 HOLIDAYS BEGINNING
 HOLIDAYS ENDING
 HEAT-UP PROGRAM
 HEATING CIRCUIT SELECTION
 HEATING CIRCUIT 1
 HEATING CIRCUIT 2
 HEATING CIRCUIT 3
 HEATING CIRCUIT 4
 HEATING CIRCUIT 5
 SETTINGS
 LOW END TEMPERATURE
 DURATION BASE TEMP
 MAXIMUM TEMPERATURE
 MAX TEMPERATURE DURATION
 RISE PER DAY
 PASTEURISATION PROGRAM
 START TIME
 DAYS
 DHW CIRCULATION PROGRAM
 SWIMMING POOL PROGRAM
 SILENT PROGRAM 1
 SILENT PROGRAM 2
 HEATING PROGRAM
Select HEATING PROGRAM to determine the times during which
rooms should be heated to the set comfort value. In the periods in
between, heating takes place to the set ECO value. The times are
determined individually for each available heating circuit.
Note
You can set the set values for each heating circuit under
SETTINGS/ HEATING/ HEATING CIRCUIT/ COMFORT TEM-
PERATURE and ECO TEMPERATURE.
 DHW PROGRAM
Select DHW PROGRAM to determine the times during which DHW
should be heated to the set comfort value. In the periods in be-
tween, DHW is heated to the set ECO value.
Note
You can adjust the set values under SETTINGS/ DHW/
DHW TEMPERATURES/ COMFORT TEMPERATURE or ECO
TEMPERATURE.
 PARTY PROGRAM
Note
In the start display, party mode is not displayed.
Select PARTY PROGRAM, to extend by a few hours the period in
which the heat pump provides room heating to comfort tempera-
ture. After the period has expired, the heat pump switches to the
operating mode applicable at the time.
Note
You can adjust the set values under SETTINGS/ HEAT-
ING/ HEATING CIRCUIT/ COMFORT TEMPERATURE or ECO
TEMPERATURE.
 HOLIDAY PROGRAM
In the holiday program, the heat pump provides room heating up
to the ECO temperature for a freely adjustable period. The set room
temperature is reduced to the ECO temperature. Frost protection
for DHW heating remains active. After the period has expired, the
heat pump switches to the operating mode applicable at the time.
The start day of the holiday period begins at 00:00. The final day
of the holiday period ends at 24:00.
The program can be terminated before the end of the set time
period by changing the operating mode to COMFORT MODE or
PROGRAMMED OPERATION.