COMMISSIONING
Menu
www.stiebel-eltron.com WPM | 19
Menu: SETTINGS
COOLING CIRCUIT 2
SET FLOW TEMPERATURE
SET ROOM TEMPERATURE
COOLING TYPE
COOLING CIRCUIT 3
SET FLOW TEMPERATURE
SET ROOM TEMPERATURE
COOLING TYPE
COOLING CIRCUIT 4
SET FLOW TEMPERATURE
SET ROOM TEMPERATURE
COOLING TYPE
COOLING CIRCUIT 5
SET FLOW TEMPERATURE
SET ROOM TEMPERATURE
COOLING TYPE
SWIMMING POOL
SWIMMING POOL
DEMAND
230V INPUT
SENSOR INPUT
SET TEMPERATURE
HYSTERESIS
BUFFER OPERATION
FIXED VALUE
DIFFERENTIAL CONTROLLER 1
DIFFERENTIAL CONTROLLER 1
START DIFFERENTIAL
HYSTERESIS
MINIMUM TEMPERATURE
MAXIMUM TEMPERATURE
STOP DELAY
DIFFERENTIAL CONTROLLER 2
DIFFERENTIAL CONTROLLER 2
START DIFFERENTIAL
HYSTERESIS
MINIMUM TEMPERATURE
MAXIMUM TEMPERATURE
STOP DELAY
THERMOSTAT FUNCTION 1
THERMOSTAT FUNCTION 1
SET TEMPERATURE
HYSTERESIS
THERMOSTAT FUNCTION 2
THERMOSTAT FUNCTION 2
SET TEMPERATURE
HYSTERESIS
VIEW
In this menu item, you can determine what faults are displayed in
the message list. Depending on the code entered, the message list
will display faults relevant either to the qualified contractor or to
the service department. If no code is entered, only faults relevant
to the device user are displayed in the message list.
Entering the code will also unlock the code-protected parameters
for a specified period.
GENERAL
TIME / DATE
Select TIME/ DATE to set the current time, year, month and day.
SET SUMMER TIME
Select SET SUMMER TIME, to set the summer time dates.
Summertime is factory-set to begin on 25March and to end on
25October.
DAY BEGINNING
Set the beginning of summer time here.
DAY ENDING
Set the end of summer time here.
LANGUAGE
Select LANGUAGE to change the system language.
CONTRAST
Select CONTRAST to adjust the display contrast.
BRIGHTNESS
Select BRIGHTNESS to adjust the display brightness.
TOUCHSENSITIVITY
Select TOUCH SENSITIVITY to adjust the touch sensitivity of the
Touch-Wheel and the sensor keys.
TOUCH ACCELERATION
Select TOUCH ACCELERATION to adjust the speed of reaction of the
Touch-Wheel and the sensor keys.
FAVOURITES
Select FAVOURITES to select up to six temperatures that will be
displayed in the main display. These temperatures will be dis-
played sequentially in groups of three.
HEATING
HEATING CIRCUIT 1| HEATING CIRCUIT 2| HEATING
CIRCUIT 3| HEATING CIRCUIT 4| HEATING CIRCUIT 5
With all heating circuit menu items, you can specify the parame-
ters independently of one another.
To Next Page
Loading...
