STIEBEL ELTRON WPM Commissioning

COMMISSIONING
Menu
www.stiebel-eltron.com WPM | 9
8. Menu
Note
Not all appliance parameters and values are displayed in
the different menus; it depends which heat pump type
and accessories are connected.
Note
Certain menu items are protected by a code. The facto-
ry-set code is 1000.
Note
The menu items shown in grey are visible only if the WPE
heat pump extension is connected.
8.1 Menu structure
 INFO
 SYSTEM
 HEAT PUMP
 DIAGNOSIS
 SYSTEM STATUS
 HEAT PUMP STATUS
 HEAT PUMP ANALYSIS
 SYSTEM
 INTERNAL CALCULATION
 NOTIFICATIONLIST
 RELAY TEST SYSTEM
 RELAY TEST HEAT PUMP
 PROGRAMS
 HEATING PROGRAM
 DHW PROGRAM
 PARTY PROGRAM
 HOLIDAY PROGRAM
 HEAT-UP PROGRAM
 PASTEURISATION PROGRAM
 DHW CIRCULATION PROGRAM
 SWIMMING POOL PROGRAM
 SILENT PROGRAM 1
 SILENT PROGRAM 2
 SETTINGS
 VIEW
 GENERAL
 FAVOURITES
 HEATING
 DHW
 COOLING
 SWIMMING POOL
 DIFFERENTIAL CONTROLLER 1
 DIFFERENTIAL CONTROLLER 2
 THERMOSTAT FUNCTION 1
 THERMOSTAT FUNCTION 2
 COMMISSIONING
 SOURCE
 HEATING
 DHW
 COMPRESSOR
 SILENT MODE
 I/O CONFIGURATION
 EMERGENCY OPERATION
 RESET
8.2 Menu description
INFO
In the INFO menu you can check set and actual values for tem-
peratures, flow rates and pressures in the heating system and
heat pump.
Note
Please note that actual and set values can only be dis-
played if the appropriate sensors are connected.
 SYSTEM
 ROOM TEMPERATURE
 FE7
 ACTUAL TEMPERATURE FE7
Actual room temperature for heating circuit 1 (HK1) (dis-
played only if FE7 remote control is connected)
°C
 SET TEMPERATURE FE7
Set room temperature for heating circuit 1 (HK1) (dis-
played only if FE 7 remote control is connected)
°C
 FET 1
 ACTUAL TEMPERATURE FET 1
Actual room temperature for the allocated heating cir-
cuit (displayed only if FET remote control is connected)
°C
 SET TEMPERATURE FET 1
Set room temperature for the allocated heating circuit
(displayed only if FET remote control is connected)
°C
 RELATIVE HUMIDITY FET 1 %
 DEW POINT TEMPERATURE FET 1
Dew point temperature (displayed only if FET remote
control is connected)
°C
 FET 2
 ACTUAL TEMPERATURE FET 2
Actual room temperature for the allocated heating cir-
cuit (displayed only if FET remote control is connected)
°C
 SET TEMPERATURE FET 2
Set room temperature for the allocated heating circuit
(displayed only if FET remote control is connected)
°C
 RELATIVE HUMIDITY FET 2 %
 DEW POINT TEMPERATURE FET 2
Dew point temperature (displayed only if FET remote
control is connected)
°C
 FET 3
 ACTUAL TEMPERATURE FET 3
Actual room temperature for the allocated heating cir-
cuit (displayed only if FET remote control is connected)
°C
 SET TEMPERATURE FET 3
Set room temperature for the allocated heating circuit
(displayed only if FET remote control is connected)
°C
 RELATIVE HUMIDITY FET 3 %
 DEW POINT TEMPERATURE FET 3
Dew point temperature (displayed only if FET remote
control is connected)
°C
 FET 4
 ACTUAL TEMPERATURE FET 4
Actual room temperature for the allocated heating cir-
cuit (displayed only if FET remote control is connected)
°C
 SET TEMPERATURE FET 4
Set room temperature for the allocated heating circuit
(displayed only if FET remote control is connected)
°C
 RELATIVE HUMIDITY FET 4 %

STIEBEL ELTRON WPM Specifications

General

Brand	STIEBEL ELTRON
Model	WPM
Category	Heat Pump
Language	English