STIEBEL ELTRON WPM - Page 46

COMMISSIONING
Settings
46 | WPM www.stiebel-eltron.com
Menu item/parameter Options Unit Min. Max. Standard System value
 SILENT MODE
 FAN REDUCTION OFF | ON OFF
 OUTPUT REDUCTION OFF | ON OFF
 OUTPUT % 70 100 100 %
 FAN % 70 100 100 %
 HEAT PUMP OFF OFF | ON OFF
 POWER-OFF
 OFF OFF | ON
 HEAT PUMP + ELECTRIC BOOSTER HEATER OFF | ON
 HEAT PUMP OFF | ON
 ELECTRIC BOOSTER HEATER OFF | ON
 SYSTEM TYPE 0 100
 I/O CONFIGURATION
 INPUT X1.13
 TELEPHONE REMOTE SWITCH OFF | ON
 HEATING CURVE OPTIMISATN OFF | ON
 SG READY OFF | ON
 INPUT X1.14
 HEATING OFF | ON
 COOLING OFF | ON
 INPUT X1.15
 HEATING OFF | ON
 PRESET TEMPERATURE 1 V °C 10 60
 PRESET TEMPERATURE 10 V °C 10 60
 COOLING OFF | ON
 PRESET TEMPERATURE 1 V °C 9 20
 PRESET TEMPERATURE 10 V °C 9 20
 OUTPUT X1.16/X1.17
 PWM 0%...100% OFF | ON
 PWM 100%...0% OFF | ON
 0-10 V OFF | ON
 OUTPUT
 BUFFER CHARGING PUMP 1 OFF | ON
 BUFFER CHARGING PUMP 2
 HK PUMP 1
 HK PUMP 2
 HK PUMP 3
 DHW CHARGING PUMP
 SOURCE PUMP
 CHARGING PUMP CONTROL HEATING
 CHARGING PUMP CONTROL DHW
 OUTPUT
 PWM % 10 100
 0-10 V V 1 10
 OUTPUT X2.10
 FATAL ERROR OFF | ON
 GENERAL ERROR
 OUTPUT X3.16/X3.17
 PWM 0%...100% OFF | ON
 PWM 100%...0%
 0-10 V
 OUTPUT
 POOL PUMP, PRIMARY OFF
 POOL PUMP, SECONDARY
 BUFFER CHARGING PUMP 3
 BUFFER CHARGING PUMP 4
 BUFFER CHARGING PUMP 5
 BUFFER CHARGING PUMP 6
 DHW CHARGING PUMP 2
 HK PUMP 4
 HK PUMP 5