Stihl FS 490 C-M - Page 16

FS 360 C-M, FS 410 C-M, FS 460 C-M, FS 490 C-M
English
14
Permissible combinations
Choose the correct combination from
the table depending on the cutting tool!
WARNING
For safety reasons only the cutting
attachments and deflectors and/or limit
stops within one line of the table may be
combined with one another. No other
combinations are permitted because of
the risk of accidents!
Cutting attachments
Mowing heads
1 STIHL SuperCut 40-2
2 STIHL AutoCut 40-2
3 STIHL AutoCut 40-4
1
4 STIHL AutoCut 46-2
5 STIHL TrimCut 41-2
6 STIHL DuroCut 40-4
7 STIHL PolyCut 41-3
Metal cutting tools
8 Grass cutting blade 230-4
(Ø 230 mm)
9 Grass cutting blade 250-32
(Ø 250 mm)
10 Grass cutting blade 250-40 Spezial
(Ø 250 mm)
11 Grass cutting blade 250-44
(250 mm dia.)
2
12 Grass cutting blade 255-8
(Ø 255 mm)
13 Brush knife 305-2 Spezial
(Ø 305 mm)
14 Brush knife, 300-3
(Ø 300 mm)
15 Shredder blade 270-2
(Ø 270 mm)
16 Circular saw blade 200 scratcher
tooth
(Ø 200 mm)
17 Circular saw blade 200-22 chisel
tooth (4119), circular saw blade
200-22 HP chisel tooth (4000)
18 Circular saw blade 225 scratcher
tooth
(Ø 225 mm)
19 Circular saw blade 225 chisel tooth
(Ø 225 mm)
20 Circular saw blade 225 (carbide-
tipped)
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives, shredder blades and circular
saw blades are not permitted.
Guards, limit stops
21 Deflector for mowing heads
22 Guard for metal cutting tools,
items 8 to 14
23 Guard for shredder blades
24 Limit stop for circular saw blades,
items 16 to 17
25 Limit stop for circular saw blades,
items 18 to 20
Carrying strap
26 Full harness must be used
1)
approved for FS 460 C-M and FS
490 C-M only
2)
not approved for FS 410 C