Stihl FS 490 C-M - Disposal and EC Declaration

FS 360 C-M, FS 410 C-M, FS 460 C-M, FS 490 C-M
English
47
Vibration measurement a
hv,eq
to
ISO 22867
The K-factor in accordance with
Directive 2006/42/EC is 2.0 dB(A) for
the sound pressure level and sound
power level; the K-factor in accordance
with Directive 2006/42/EC is 2.0 m/s
2
for the vibration level.
REACH
REACH is an EC regulation and stands
for the Registration, Evaluation,
Authorisation and Restriction of
Chemical substances.
For information on compliance with the
REACH regulation (EC) No. 1907/2006
see www.stihl.com/reach.
Exhaust Emissions
The CO
2
value measured in the EU type
approval procedure is specified at
www.stihl.com/co2.
The measured CO
2
value was
determined on a representative engine
in accordance with a standardized test
procedure under laboratory conditions
and does not represent either an explicit
or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission
requirements are fulfilled by the
intended usage and maintenance
described in this instruction manual. The
type approval expires if the engine is
modified in any way.
Users of this machine may only carry out
the maintenance and service work
described in this user manual. All other
repairs must be carried out by a
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer. STIHL dealers are
regularly given the opportunity to attend
training courses and are supplied with
the necessary technical information.
When repairing the machine, only use
replacement parts which have been
approved by STIHL for this power tool or
are technically identical. Only use high-
quality replacement parts in order to
avoid the risk of accidents and damage
to the machine.
STIHL recommends the use of original
STIHL replacement parts.
Original STIHL parts can be identified by
the STIHL part number, the {
logo and the STIHL parts symbol K
(the symbol may appear alone on small
parts).
FS 490 C-EM L: 112 dB(A)
with metal mowing
attachment
FS 360 C-EM: 110 dB(A)
FS 410 C-EM: 112 dB(A)
FS 410 C-EM L: 112 dB(A)
FS 460 C-EM: 110 dB(A)
FS 460 C-EM L: 110 dB(A)
FS 490 C-EM: 113 dB(A)
FS 490 C-EM L: 113 dB(A)
with mowing
head
Handle,
left
Handle,
right
FS 360 C-EM: 2.5 m/s
2
2.2 m/s
2
FS 410 C-EM: 2.4 m/s
2
2.3 m/s
2
FS 410 C-EM L: 2.4 m/s
2
2.3 m/s
2
FS 460 C-EM: 2.5 m/s
2
2.1 m/s
2
FS 460 C-EM L: 2.1 m/s
2
2.3 m/s
2
FS 490 C-EM: 3.7 m/s
2
3.7 m/s
2
FS 490 C-EM L: 3.7 m/s
2
3.7 m/s
2
with metal mow-
ing attachment
Handle,
left
Handle,
right
FS 360 C-EM: 2.2 m/s
2
2.0 m/s
2
FS 410 C-EM: 2.3 m/s
2
2.0 m/s
2
FS 410 C-EM L: 2.3 m/s
2
2.0 m/s
2
FS 460 C-EM: 1.9 m/s
2
1.6 m/s
2
FS 460 C-EM L: 1.9 m/s
2
1.6 m/s
2
FS 490 C-EM: 2.8 m/s
2
2.8 m/s
2
FS 490 C-EM L: 2.8 m/s
2
2.8 m/s
2
Maintenance and Repairs