Stihl FS 490 C-M - Nylon Line Adjustment and Blade Replacement

FS 360 C-M, FS 410 C-M, FS 460 C-M, FS 490 C-M
English
36
N Use resistor type spark plugs with a
properly tightened adapter nut.
Installing the spark plug
N Screw in spark plug
N Firmly press the spark plug
connector onto the spark plug.
N Align the spark plug connector so
that the ignition cable points to the
upper left corner (arrow).
N Place the cap (1) on the hood from
behind and at a slight angle,
pressing the nose (2) into the
opening (3) of the hood.
N On the front, swivel the cap onto the
hood, screw in the screw (4) and
tighten.
If engine running behavior is still
unsatisfactory after servicing the air filter
and adjusting the throttle cable, the
cause may be the muffler.
Have the muffler checked by a servicing
dealer for contamination
(carbonization).
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
If the machine is to remain out of use for
approx. 3 months or more
N Drain and clean the fuel tank in a
well ventilated place
N Dispose of fuel in accordance with
the regulations and having regard
for the environment
N Run the engine until the carburetor
is dry. This helps to prevent the
carburetor diaphragms sticking
together.
N Remove, clean and inspect the
cutting attachment. Treat metal
cutting attachments with protective
oil.
N Thoroughly clean the machine
N Store the machine in a dry and safe
place, out of the reach of children
and other unauthorized users
0000-GXX-B459-A0
4
3
2
9926BA022 KN
Engine Running Behavior Storing the Machine