0458-662-0121-A
11
English
4 Safety Precautions
WARNING
￭ If it is not in an safe condition, parts of the metal cutting
attachment may come off and be thrown at high speed.
They may cause serious injury to persons.
► Never work with a damaged metal cutting attachment or
damaged mounting hardware.
► Sharpen the metal cutting attachment correctly.
► Deburr the cutting edges with a file.
► Have the metal cutting attachment balanced by a STIHL
servicing dealer.
► Observe and remain inside the wear limits.
► If you have any doubts, be sure to consult a STIHL
dealer.
4.6.5 Battery
The battery is in safe condition when the following conditions
are met:
– The battery is not damaged.
– The battery is clean and dry.
– The battery is working and has not been modified.
WARNING
￭ The battery cannot function safely if it is not in safe
condition. There is a risk of serious injury to persons.
► Use an undamaged and functioning battery.
► Do not charge a damaged or defective battery.
► If the battery is dirty or wet: clean the battery and allow
it to dry.
► Do not modify the battery.
► Do not insert objects into the apertures in the battery.
► Never connect the battery terminals to metallic objects
and cause a short circuit.
► Do not open the battery.
► Replace worn or damaged warning signs.
￭ Fluid may leak from a damaged battery. If the fluid
contacts the skin or eyes, this may cause irritation.
► Avoid contact with the fluid.
► In the event of contact with the skin: wash the affected
areas with plenty of soap and water.
► In the event of contact with the eyes: rinse the eyes with
plenty of water for at least 15 minutes and seek medical
attention.
￭ A damaged or defective battery may emit an unusual
odour, smoke or catch fire. This may result in serious or
fatal injury to people and damage to property.
► If the battery emits an unusual odour or smoke: do not
use the battery and keep it away from flammable
materials.
► If the battery catches fire: try to extinguish the battery
using a fire extinguisher or water.
4.7 Operation
WARNING
￭ The user cannot concentrate on the work in certain
situations. The user may stumble, fall and be seriously
injured.
► Work calmly and carefully.
► If light and visibility are poor: Do not use your trimmer.
► Operate the trimmer alone.
► Keep the cutting attachment close to the ground.
► Watch out for obstacles.
► Stand on the ground while working and keep a good
balance.
► If you begin to feel tired: Take a break.
￭ The rotating cutting attachment can cut the user. This can
result in serious injuries.
► Do not touch the rotating cutting attachment.
► If the cutting attachment is blocked by an object: Switch
off the trimmer and remove the battery. Then remove
the object causing the blockage.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
