0458-662-0121-A
22
English
12 Operating the Trimmer
► Connect the carrying ring (2) to the carabiner (1).
If you are using a mowing head:
► Hold the brushcutter firmly with one hand on the control
handle – wrap your thumb around the handle.
► Hold the brushcutter with your other hand on the loop
handle – wrap your thumb around the loop handle.
If you are using a metal cutting attachment:
► Hold the brushcutter firmly with your right hand on the
control handle – wrap your thumb around the handle.
► Hold the brushcutter with your left hand by the loop handle
– wrap your thumb around the loop handle.
12.2 Setting the performance level
Depending on the application, 3 power levels can be set.
The LEDs indicate the selected power level. The higher the
power level, the faster the cutting attachment can run.
The selected power level affects the battery’s runtime. The
lower the power level, the longer the runtime.
► Depress the trigger lockout (1) and hold it in that position.
► Push the release slide (2) in the direction of the loop
handle with your thumb and hold it there.
The LEDs glow and show the power level selected.
► Push the release slide (2) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. After the third
performance level, it starts again with the first
performance level.
► Push the release slide (2) forwards and allow it to spring
back as many times as necessary to select the required
power level.
12.3 Mowing
The cutting height is determined by the distance of the
cutting attachment from the ground.
0000-GXX-4604-A0
0000-GXX-4605-A0
1
2
0000097100-001
To Next Page
Loading...
Need help?
General
Weight and Dimensions
