Stihl MS 261 C User Manual

16 MS 261, MS 261 C
Condition Cause Remedy
Engine will not idle, idle speed too
high
Throttle shutter opened too wide by
idle speed screw (LA)
Reset idle speed screw (LA)
correctly
Oil seals/crankcase leaking Seal or replace oil seals/crankcase
Throttle shutter does not close Install new carburetor
Engine stops while idling Idle jet bores
or ports blocked
Clean the carburetor
Low speed screw too rich or
too lean
Reset low speed screw (L)
correctly
Setting of idle speed screw LA
incorrect – throttle shutter
completely closed
Reset idle speed screw (LA)
correctly
Tank vent faulty Replace tank vent
Leak on fuel hose from tank to
carburetor
Seal connections or install new fuel
hose
Saw chain rotates at idle speed Engine idle speed too high Readjust with idle speed screw
LA (counterclockwise)
Clutch springs stretched or fatigued Replace the clutch springs or install
new clutch
Clutch spring hooks broken Replace the clutch springs

Stihl MS 261 C Specifications

General

Displacement	50.2 cm³
Powerhead Weight	4.9 kg
Sound pressure level	103 dB(A)
Sound power level	116 dB(A)
Vibration level (left/right)	3.5/3.5 m/s²
Bar Length	40 cm (16 in.)
Fuel Capacity	500 cc
Oil Capacity	270 ml (9.1 oz.)
Chain pitch	3/8"
Engine Power	3.0 kW