Stihl RE 120 - Attaching and Removing the Spray Lance

0458-620-0121-A
18
English 7 Assembling the pressure washer
7.4.2 Removing the spray gun
RE 110
► Press and hold the locking lever (1).
► Pull out connector (2).
RE 120
► Press and hold the locking lever (1).
► Pull out connector (2).
7.5 Attaching and removing the spray lance
7.5.1 Attaching the spray lance
► Push spray lance (1) into spray gun (2).
► Twist the spray lance (1) until it engages.
► If the spray lance (1) cannot be pushed easily into the
spray gun (2): Grease the gasket on the spray lance (1)
with grease for fittings.
7.5.2 Removing the spray lance
► Squeeze spray lance (1) and spray gun (2) together and
twist as far as they will go.
► Pull spray lance (1) and spray gun (2) apart.
2
1
0000-GXX-4349-A0
0000-GXX-5096-A0
1
2
0000-GXX-4350-A0
1
2
0000-GXX-4351-A0
2
1