0458-620-0121-A
24
English
11 Operating the pressure washer
11.3 Cleaning
According to the application, the following nozzles can be
used:
– Fan-jet nozzle: The fan-jet nozzle is designed for cleaning
large areas.
– Rotary nozzle: The rotary nozzle is designed for removing
stubborn dirt.
The user can work close up to the surface in order to remove
stubborn dirt.
The user can work at a distance when cleaning any of the
following surfaces:
– Painted surfaces
– Wooden surfaces
– Rubber surfaces
The fan-jet nozzle is adjustable.
Turning the fan-jet nozzle in the + direction increases the
working pressure.
Turning the fan-jet nozzle in the – direction reduces the
working pressure.
► Before starting work, direct the water jet at an
inconspicuous area of the surface and check that the
surface does not suffer damage.
► Select the distance between the nozzle and the surface to
be cleaned so that the surface to be cleaned is not
damaged.
► Adjust the fan-jet nozzle so that the surface to be cleaned
is not damaged.
► Move the spray attachment evenly along the surface to be
cleaned.
► Move forward slowly in a controlled manner.
11.4 Using detergents
Detergents can intensify the cleaning effect of the water.
The STIHL spraying set supplied with the machine must be
used.
RE 110
► Meter out and use the detergent as described in the
detergent Instruction Manual.
► Fill bottle (1) with max. 500 ml of detergent.
► Screw spray nozzle (2) onto the bottle (1) and tighten
hand-tight.
0000-GXX-4628-A0
0000-GXX-4345-A0
2
1
To Next Page
Loading...
