Still ECU-16 - On-Board Battery Charger (Optional)

Knowledge of the Truck 3
On-board battery charger (optiona
l)
• Using the keyboard, enter the control code
’33’ andpressthekey(OK).TheyellowLED
(D) will begin to flash.
• Enter a new four-digit password for the
operator (Pin Code) and press the key (OK).
• At the end of the procedure, the
green LED
(A) comes on and remains lit.
• In the case of an error in the procedure, the
red LED (B) comes on and the numerical
keypad emits an acoustic warning signal,
after which the green LED (A) comes on and
remains lit. Repeat the procedure
Cancelling an operator password (Pin Code)
• Enter the password of the person responsi-
ble for operators (Master Code) (for the first
time memorised, the password is the one
set by the factory: 111111) and press the
key (OK). The green LED (A) turns off and
the yellow LED turns on(D).
• Using the keyboard, enter
the control code
’13’ and press the key (OK)
. The yellow LED
(D) will begin to flash.
• Enter the operator’s password to be can-
celled (Pin Code) and press the key (OK).
• At the end of the procedure, the green LED
(A) comes on and remains lit.
• In the case of an error in t
he procedure, the
red LED (B) comes on and th
e numerical
keypad emits an acoustic
warning signal,
after which the green LED (A) comes on and
remains lit. Repeat the procedure
Cancelling all the operator passwords (Pin
Code)
• Enter the password of the person responsi-
ble for operators (Master Code) (for the first
time memorised, the password is the one
set by the factory: 111111) and press the
key (OK). The green LED (A) turns off and
the yellow LED turns on(D).
• Using the keyboard, enter th
e control code
’22’ and press the key (OK). T
he yellow LED
(D) will begin to flash.
• Enter the password of the person respon-
sible for the operators (Master Code) and
press the key (OK).
• At the end of the procedure, the green LED
(A) comes on and remains lit.
• In the case of an error in th
e procedure, the
red LED (B) comes on and the
numerical
keypad emits an acoustic w
arning signal,
after which the green LED
(A) comes on and
remains lit. Repeat the p
rocedure
WARNING
This procedure cancels all of the operator pass-
words (Pin code) memorised, including the fac-
tory-set password (1234).
On-board battery cha
rger
(optional)
Read the User and mai
ntenance manual.
45
588043482 EN - 04/2016 31