Still ECU-16 - Scheduled Maintenance; Synoptic Table of Maintenance Operations

Servicing 5
Scheduled Maintenance
Scheduled Maintenance
Synoptic Table of Maintenance Operations
Operations
Intervals in hours
Com-
pleted
1000
(a)
2000
(b)
3000
(c)
v
Checks and tests before use (see ⇒ Chapter "List of checks
before use", P. 4-46)
Check wheel tightness
Grease the reducer fifth wheel
Check the condition of the piping
Check hydraulic system oil level
Check reducer oil level
Check bushes and levers
Check pivot wheels
Check the condition of battery and truck wiring
Check insulation between chassis and any electric motors
Check insulation between chassis and electronic control
Grease micro tiller
(1)
Check air gap, carry out any adjustment or disc replacement
Grease the rods and levers
Change hydraulic system oil
(1)
= to be carried out every 1000 hours or
6 months, whichever comes first.
1000
(a)
= To be repeated every 1000 hours.
For example at 1000, 2000, 3000, 4000, 5000.
..
2000
(b)
= To be repeated every 2000 hours.
For example at 2000, 4000, 6000, 8000,
10,000. . .
3000
(c)
= To be repeated every 3000 hours.
For example at 3000, 6000 and 9000. . .
ENVIRONMENT NOTE
During maintenance operations, follow the
instructions provided in the section "Safety
45
588043482 EN - 04/2016 73