Use and Operation 4
Load Placement
Taking up load
– Approach the load with caution and with as
much precision as possible.
– Lower the fork arms so that they can easily
be inserted into the pallet.
– Slowly insert the forks at th
e centre of the
load to be lifted.
CAUTION
Insert the fork without bumping into either the
shelving or the load.
– Insert the forks as far as possible below
the load. If possible, the forks should be
inserted far enough in that the load is resting
against the fork carriage. The load centre of
gravity must be centred between the forks.
DANGER
Pay attention to the part of the forks protruding from
the load to be lifted.
Do not strike the wall, the shelving or other loads
and/or objects behind the load to be picked up.
– Lift the load a few centimetres from the
ground and read the "Transporting loads"
section.
45
588043482 EN - 04/2016 57
To Next Page
Loading...
