Stober SD6 - User Information; Scope of Documentation; Storage and Transfer; Described Product

2 | User information STOBER
8
04/2021 | ID 442537.08
2 User information
This documentation covers the SD6 drive controller. You will receive support for the assembly of the individual modules
along with the associated components that you will need to operate the drive controllers in the control cabinet.
You will also find information on wiring the modules correctly and checking their functionality in the group with an initial
test.
Combinations with other 6th generation STOBER drive controllers are possible under certain boundary conditions.
2.1 Scope of documentation
This documentation contains important safety instructions as well as a selection of information about the SD6 drive
controller that you need for commissioning.
Note that this documentation does not replace the detailed manual. Read the detailed documentation first before working
with the devices.
You can find the manual and other documentation in PDF format on the enclosed CD/DVD or on our website.
An overview of the available documentation about the SD6 drive controller can be found in the chapter Detailed
information [}161].
2.2 Storage and transfer
As this documentation contains important information for handling the product safely and efficiently, it must be stored in
the immediate vicinity of the product until product disposal and be accessible to qualified personnel at all times.
Also pass on this documentation if the product is transferred or sold to a third party.
2.3 Described product
This documentation is binding for:
Drive controllers of the SD6 series in conjunction with the
DriveControlSuite (DS6) software in V 6.5-B or higher, PASmotion in V 1.3.0 or higher and associated firmware in V 6.5-B or
higher.
2.4 Timeliness
Check whether this document is the latest version of the documentation. We make the latest document versions for our
products available for download on our website:
http://www.stoeber.de/en/downloads/
.
2.5 Original language
The original language of this documentation is German; all other language versions are derived from the original language.