Stober SD6 - X20: Motor

STOBER 8 | Connection
04/2021 | ID 442537.08
91
8.4.16 X20: Motor
The motor is connected to X20. For size 3 device types, there is also the connection for the DC link connection and for a
braking resistor at terminal X20.
Size 0
Terminal Pin Designation Function
1 | 2 | 3 | 4
1 U Motor phase U connection
2 V Motor phase V connection
3 W Motor phase W connection
4 PE Grounding conductor
Tab. 88: X20 connection description – Size 0
For connecting wiring, observe the terminal specifications in the chapter GFKC 2,5 -ST-7,62 [}155].
Size 1
Terminal Pin Designation Function
1 | 2 | 3 | 4
1 U Motor phase U connection
2 V Motor phase V connection
3 W Motor phase W connection
4 PE Grounding conductor
Tab. 89: X20 connection description – Size 1
For connecting wiring, observe the terminal specifications in the chapter SPC 5 -ST-7,62 [}156].
Size 2
Terminal Pin Designation Function
1 | 2 | 3 | 4
1 U Motor phase U connection
2 V Motor phase V connection
3 W Motor phase W connection
4 PE Grounding conductor
Tab. 90: X20 connection description – Size 2
For connecting wiring, observe the terminal specifications in the chapter SPC 16 -ST-10,16 [}157].