StoneL Prism PI - Default Chapter; Table of Contents

7 PI 70 en2 | Prism PI
StoneL publication 105431revC
Read these instructions rst!
These instructions provide information about safe handling and operation of the Prism PI by StoneL. If you require additional assistance, please
contact the manufacturer or manufacturer’s representative. Addresses and phone numbers are printed on the back cover.
Save these instructions.
Subject to change without notice.
All trademarks are property of their respective owners.
Table of contents
1 General 3
1.1 Introduction 3
1.2 Title plate markings 3
1.3 CE markings 3
1.4 Recycling and disposal 3
1.5 Safety precautions 3
1.6 Assembly drawing 4
1.7 Specications for all models 4
1.8 Pneumatic valve specications 5
1.9 Pneumatic valve schematics 5
1.10 Dimensions 6
2 Assembly and mounting 7
2.1 Instructions 7
2.2 Prism PI assembly gure 8
3 Maintenance, repair and installation 9
3.1 Maintenance and repair 9
3.2 Installation 9
3.3 Special conditions of use 9
4 Function specic details 10
4.1 Sensor/switching modules 10
4.1.1 SST NO sensor (33S) 10
4.1.2 NAMUR sensor (45S) 11
4.1.3 Expeditor, standard stroke (80S & 80W) 13
4.1.4 Expeditor, long stroke (81S & 81W) 14
4.2 Valve communication terminals (VCT) 16
4.2.1 VCT with DeviceNet™ communication (92S & 92W) 16
4.2.2 VCT with AS-Interface communication (96S & 96W) 18
4.2.3 VCT with AS-Interface communication and extended addressing (97S & 97W) 20
5 Wireless Link user guide 22
5.1 Getting started 22
5.2 Home screen 22
5.3 Locked screen 22
5.4 Device detail screen 23
5.5 More information screen 24
5.6 Diagnostics screen 25
5.7 Federal Communication Commission (FCC) statement 26
6 Model/Type code 27
7 Regulatory, specic conditions of use, and product marking 28
8 Appendix 30
8.1 Controlled installation drawings 30