EasyManua.ls Logo

StoneL Prism PI - Pneumatic Valve Specifications; Pneumatic Valve Schematics

StoneL Prism PI
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
StoneL publication 105431revC
7 PI 70 en Prism PI | 5
Specications
General pneumatic specications
Conguration 3-way, 2-position, spring return
Type Direct acting
Porting ⁄ NPT (stainless steel reinforced)
Medium Air or inert gas
Medium temperature range (TS) -40° C to 80° C (-40° F to 176 ° F)
Operating pressure 25 psi to 120 psi (1.72 to 9.65 bar)
Operating life 1million cycles
Manual override Internal momentary
Solenoid coil specications
1K (33_, 92_, 96_, 97_)
Operating voltage
Power consumption
Flow rating
Operating temperature
Filtration requirements
24 VDC
1.0 watt
0.2 Cv (Kv = 0.17 based on ow m3/hr)
-10° C to 50° C (14° F to 122° F)
40 microns
2K (80_, 81_,)
Operating voltage
Power consumption
Flow rating
Operating temperature
Filtration requirements
24 VDC
1.0 watt
0.2 Cv (Kv = 0.17 based on ow m3/hr)
-10° C to 50° C (14° F to 122° F)
40 microns
1M (33_)
Operating voltage
Power consumption
Flow rating
Operating temperature
Filtration requirements
120 VAC 50/60 Hz
1.0 watt
0.2 Cv (Kv = 0.17 based on ow m3/hr)
-10° C to 50° C (14° F to 122° F)
40 microns
1N (33_)
Operating voltage
Power consumption
Flow rating
Inrush current
Operating temperature
Filtration requirements
20 - 125 VAC 50/60 Hz; 20 - 55 VDC
12 mA @ 20 - 125 VAC (1.0 watt typical)
20 mA @ 20 - 55 VDC (0.5 watts typical)
0.1 Cv (Kv = 0.08 based on ow m3/hr)
3.75 A @ 125 VAC (typical)
0.15 A @ 24 VDC (typical)
-20° C to 60° C (-4° F to 140 ° F)
50 microns
1N (92_, 96_, 97_)
Operating voltage
Power consumption
Flow rating
Operating temperature
Filtration requirements
24 VDC
0.5 watts
0.1 Cv (Kv = 0.08 based on ow m3/hr)
-20° C to 60° C (-4° F to 140 ° F)
50 microns
1N (45_)
Operating voltage
Power consumption
Flow rating
Operating temperature
Filtration requirements
Entity parameters
18 - 28 VDC
0.3 watts
0.1 Cv (Kv = 0.08 based on ow m3/hr)
-20° C to 60° C (-4° F to 140 ° F)
50 microns
Ui=28 VDC, Ii=120 mA, Ci=3 nF, Li=0 mH, Pi=0.84 W
1.8 Pneumatic valve specications 1.9 Pneumatic valve schematics
3-way, 2-position, direct acting
P E
A
Actuator
Manifold
Solenoid

Related product manuals