Stonex S700A GNSS Receiver – User Manual 8
2. Web Interface
S700A receiver has Web UI functionality. By getting access to its internal
hotspot, you can easily manage it on the Web UI. As long as you have a
smart phone, PC or handheld with WIFI functionality, you can easily connect
to the S700A receiver to view status, download data and configure the
receiver.
S700A receiver is default to open WIFI automatically when it’s powered on.
Use smart phone/PC/handheld to search the receiver hotspot, whose name is
its serial number, and connect it. Receiver WIFI only supports getting access
to Web UI to check status and set up mode, not for Internet connection.
The WIFI hotspot name is the serial number of the receiver.
Enter the IP address: 192.168.10.1. A window will pop up when the user log
in, which need to fill in the user, that is “admin”, and password that is
“password”.
2.1 Status
The status page displays the current state of S700A receiver, including
position information, data link status, satellite charts, and instrumentation
information. Click on a module to display its details.
2.2 Settings
The Settings page includes working mode, satellite Settings, device
configuration, NMEA messages, view logs, and configuration sets. You can
set the host mode, satellite system, system parameters, and NMEA message.
And you can view and download the logs as well. Also you could upload,
download, delete and apply the related configuration. Click on a module to
display its details.