STONEX S900 - UHF Antenna; Serial Communication Cable

Stonex S900 GNSS Receiver – User Manual 16
4.3 UHF antenna
When receiver is in internal radio mode, UHF antenna (as illustrated in Figure
4.3.1) is in need.
Figure 4.3.1 QT440A UHF antenna
4.4 7-pin serial cable
One end of the 7-pin serial cable, the 7-pin serial port, is to connect the
receiver, and the other end of the cable, the USB and the DB9 interface are
for data communication respectively with PC and handheld as illustrated in
Figure 4.4.1.
Figure 4.4.1 7-pin serial cable