STONEX S900 - Web User Interface

Stonex S900 GNSS Receiver – User Manual 5
2. Web User Interface
S900 receiver has Web UI functionality. By getting access to its internal
hotspot, you can easily manage it on the Web UI. As long as you have a
smart phone, PC or handheld with WIFI functionality, you can easily connect
to the S900 receiver to view status, download data and configure the
receiver.
S900 receiver is default to open WIFI automatically when it’s powered on.
Use smart phone/PC/handheld to search the receiver hotspot, whose name is
its serial number, and connect it. (Receiver WIFI only supports getting access
to Web UI to check status and set up mode, not for Internet connection.)
After connecting to the S900 receiver WIFI, open the browser and enter
“192.168.10.1” in IP address. A window pops up and asks for user name and
password. The default user name and password are: admin; password.
And then you can login the Web UI of S900 receiver.