Need help?Do you have a question about the STONEX S9i and is the answer not in the manual?
General| Type | GNSS Receiver |
|---|---|
| Frequency Bands | L1, L2, L5 |
| Data Update Rate | 20 Hz |
| Internal Memory | 8 GB |
| Battery Life/Operating Time | 10 hours |
| Operating Temperature | -40°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Waterproof/Dustproof | IP67 |
| Signal Tracking | GPS, GLONASS, BeiDou, Galileo, QZSS |
| Static Accuracy | Horizontal: 2.5 mm + 0.5 ppm, Vertical: 5 mm + 0.5 ppm |
| Data Format | RTCM 2.x, 3.x, CMR, CMR+, NMEA-0183 |
| Communication | Bluetooth, Wi-Fi |
| Battery | Li-ion 7.4 V |
| Humidity | 95% non-condensing |
| Positioning Accuracy (RMS) | Horizontal: 8 mm + 1 ppm, Vertical: 15 mm + 1 ppm |
Describes the front panel of the S9i receiver, including functional buttons and indicators.
Details the back panel, including battery compartment, SIM card slot, and Micro SD card slot.
Describes the connections and interfaces located on the bottom of the receiver.
Guides on setting up the receiver as a base station or a rover.
Explains the functions of the power and function keys on the receiver.
Details how to change the operating mode and data communication method.
Instructions on connecting to the receiver's WiFi hotspot and accessing the web interface.
Shows current work status, system mode, datalink, coordinates, and satellite solution.
Offers functions like firmware upgrade, registration, and logging.
Contains configurations for working mode, device settings, and NMEA messages.
Allows setting static, rover, or base modes with specific parameters like cutoff angle.
Specific settings for base mode, including base coordinates and automatic activation.
Important warnings and cautions for safe operation and handling.
General safety alerts, definitions of WARNING and CAUTION messages.
Warnings and precautions for handling damaged or leaking lithium-ion batteries.
To Next Page
