SAFETY RULES
Before installing anything, carefully read and follow the safety instructions.
IMPORTANT
You must use the power adapter provided with the product.
Before connecting to the mains power supply
Ensure that neither your Stormshield product, the power cord nor power adapter is damaged.
Ensure that the power supply or power adapter of your Firewall is compatible with the voltage of your
power supply network.
When the product’s power cord or power adapter has a ground pin, it must be plugged into a properly
grounded electrical outlet. Ensure that the connection is reliable and that the protective earth circuit of
your installation complies with safety standards in force.
To be able to disconnect the product, ensure that the connection to the power supply is always easily
accessible.
Warranty and safety rules
Under no circumstances should you take apart a Stormshield Network appliance on your own. Only NETASQ,
which markets the Stormshield Network range, and its approved maintenance agents are authorized to do so.
A seal label protects all Stormshield Network Firewalls from being opened.
Your warranty will be rendered null and void should you dismantle a Stormshield Network Firewall on your
own.
IMPORTANT
Never dismantle your Stormshield appliance, as doing so may cause hardware accidents
and/or bodily harm.
IMPORTANT
Do not insert objects into the appliance’s vents – this may hinder the rotation of an internal
fan or damage it, causing the appliance to overheat. This may also cause a short-circuit that
may lead to the breakdown of the appliance.
IMPORTANT
Copper Ethernet cables connected to your Stormshield Network Firewall must not be
connected to other appliances located in other buildings.
To Next Page
Loading...
