STOROpack AIRmove2 - AIRmove² External Control Options

AIRmove
2
- Perfect Protective Packaging 17
Selection Void S
Press 2 x to change to
Cushion M
Selection Cushion M
Press and
Cushion M will be set
Cushion M
8.11 Factory settings
The ex-works setting enables resetting all choices, parameters, adjustments and changes back to the
factory settings.
Machine off
Power switch [ 0 ]
display off
Power switch on
Power switch on [ 1 ]
Press +
and hold while switching on the
machine.
Release the buttons + when
the display runs
All settings have been reset, proceed with section “First-parameter Set-up” again to choose a film type.