To Next PageTo Next Page
Need help?Do you have a question about the Strapack iQ400 and is the answer not in the manual?
Specifies the required environmental conditions for operating the machine safely and effectively.
Provides contact details for various Strapack offices worldwide for inquiries and support.
Details the location and required information from the machine's identification plate for service.
Lists the technical specifications of the iQ-400 machine, including dimensions, weight, and power.
Presents a visual representation of the machine's dimensions with both metric and imperial units.
Provides overarching safety warnings and precautions for operating the strapping machine.
Details specific precautions related to the power cord to prevent electrical hazards.
Highlights safety measures to follow when handling or loading the strap.
Lists types of packages that should not be strapped and general package handling safety.
Instructions for safely moving and installing the machine in a suitable environment.
General safety guidelines and precautions to follow during the machine's operation.
Procedures and safety precautions for performing routine maintenance and adjustments.
Explains the meaning of warning and caution labels and their importance for user safety.
Step-by-step guide on how to connect the power cable for specific regions.
Details the functions of each button, switch, and indicator lamp on the machine's control panel.
Explains how to switch between Torque and Stroke tension modes and their characteristics.
Describes internal adjustment dials for heater temperature and seal time, and fuse specifications.
Provides a detailed electrical wiring diagram for understanding the machine's internal connections.
Step-by-step instructions for properly loading a strap coil onto the machine's reel unit.
Guide on how to thread the strap through the machine's mechanisms for operation.
Instructions on how to perform strapping operations, including placing packages and starting cycles.
Routine checks and cleaning procedures to maintain the machine's performance and longevity.
Procedure to adjust VR3 on the control board for optimizing strap tension settings.
Detailed steps for adjusting the machine to accommodate different strap widths.
General| Model | iQ400 |
|---|---|
| Category | Packaging equipment |
| Sealing Method | Heat seal |
| Strap Width | 5mm |
| Strapping Thickness | 0.45mm to 0.75mm |
| Tension Range | 15 to 450N |
| Power Supply | 50/60Hz |
| Type | Automatic strapping machine |
