EasyManua.ls Logo

Strapack iQ400 - Introduction to StraPack iQ-400; Operating Environment for StraPack iQ-400

Strapack iQ400
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
p. 2
CHAPTER 1 INTRODUCTION
Thank you very much for your purchase of a STRAPACK strapping machine.
We are prepared to offer extensive after sales service for our products through our distribution network.
To effectively use the strapping machine, daily maintenance and proper handling are important.
You are requested to have a complete understanding of this instruction manual for proper use and
maintenance of the machine over a long period of time.
Also, please carefully read the separate leaflet “Check that Seal !", to prevent any accidents during operation.
Operating Environment
Use this machine where the following environmental conditions are met.
Temperature: Between 0 degrees Celsius and 40 degrees Celsius (do not freeze )
The humidity: Relative humidity being 0-80% (without condense dew)
Atmosphere: Free from excessive dust, acid fume, corrosive gases and salt.
The place where water and oil do not congregate or drip.
A place without the danger of explosion
This machine is not explosion-proof type.
800-821-2177
Service@MillerBevco.com or Parts@MillerBevco.com
www.MillerBevco.com

Related product manuals