Strata 21597 - Before First Use

12
BEFORE FIRST USE
Perform the following steps before using the bread maker for the first time.
1. Remove all accessories and any stickers that may be present inside or outside the
housing.
2. Using the instructions in the CLEANING section above, clean all parts then
reassemble the bread maker before first use.
3. Place the bread maker in the middle of a large, stable
surface, then plug the power cord into a nearby AC power
outlet. The display will show the bread maker is set for 1.5
lbs., program 1, 3:00 hours cooking time, and medium colored
crust, as shown in the image to the right.
4. Repeatedly press the MENU button until the display shows program 15 (Bake).
5. Press the COLOR button until the display shows the dark crust color option ( ).
6. Press the START button to begin the bake cycle. The appliance may emit a little
smoke and/or odor when you use it for the first time. This is normal and will subside
after the first or second use.
7. Allow the bread maker to bake the empty bread pan for 10 minutes, then press and
hold the START button to stop the cycle.
8. Allow the bread maker to fully cool, then disassemble and clean all parts using the
instructions in the CLEANING section above.
Congratulations, your bread maker is ready for normal use!